Air Torque AT045U Guia De Inicio Rapido página 10

GB
for models AT051U→AT801U (0,5° over 0° for AT045U)
and that the dimension "A" on both sides is the same as
shown in figure 11.
C) End cap (Part N° 30) assembly, figures 12, 13 and 14:
• Assemble one end cap at a time.
• Lubricate the body.
• For spring return actuators, insert the springs in each
end cap according to the desired configuration, as shown
in figure 12 and
AT101U→AT801U insert spring cartridges as shown in
figure 13.
10
Fig. 11
related tables. For models
Fig. 12
Fig. 13
SPRING SET CONFIGURATION
AT045U configuration:
Spring Set
Spring type
S1-1 1 (green)
S1-2 1 (green)
S2-2
S2-3
S3-3
AT051U configuration:
Side B
AT051U
Spring
Internal
Set
Spring type Spring type
S1 1(green)
S2 ------------
S3 ------------
S4 ------------
S5 ------------
S6 1 (green)
S7 1 (green)
S8 1 (green)
• Fit end cap o-ring seal (14) into the groove on both end caps.
IMAT 4thGU-E
Side B Side A
AT045U AT045U
Spring type
1 (green)
2 (red)
2 (red) 2 (red)
2 (red) 3 (black)
3 (black) 3 (black)
Side A
AT051U AT051U AT051U
External Internal External
Spring type Spring type
------------ ------------ 2 (black)
2 (black) ------------ 2 (black)
2 (black) ------------
3 (red) ------------
3 (red) 1 (green) 2 (black)
2 (black) 1 (green) 2 (black)
2 (black) 1 (green)
3 (red) 1 (green)
Fig. 14
3 (red)
3 (red)
3 (red)
3 (red)