Protecting The Environment; Ec Declaration Of Conformity - Black and Decker BDBB226 Manual De Instrucciones

Maintenance
Your Black & Decker corded/cordless appliance/tool
has been designed to operate over a long period of time
with a minimum of maintenance. Continuous
satisfactory operation depends upon proper appliance/
tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless appliances/tools.
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack
Or run the battery down completely if it is integral and
then switch off.
Unplug the charger before cleaning it. Your charger
does not require any maintenance apart from regular
cleaning.
Regularly clean the ventilation slots in your appliance/
tool/charger using a soft brush or dry cloth.
Regularly clean the housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
from the interior (if applicable).

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Batteries
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Do not short-circuit the battery terminals.
Run the battery down completely, then remove it from
the tool.
NiCd and NiMH and Lithium Ion, batteries are
recyclable. Place the battery in a suitable packaging
to ensure that the terminals cannot be short-circuited.
Take them to any authorised repair agent or a local
recycling station.
Technical data
Input voltage
Input current
Weight
Battery
Charger
Input
Approx. charging time
Weight

EC declaration of conformity

BDBB226 H1
Black & Decker declares that these products conform to:
Standards & Legislation.
EN60598
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker
Director of Consumer Engineering
Spennymoor, County Durham, DL16 6JG,
ENGLISH
BDBB226
Vac 5
mA 200 max
kg 0.46
Type 3.6V 1.3Ah NiMH
Vac 230
h 18 - 20
kg 0.2
Kevin Hewitt
United Kingdom
19-05-2009
5