Using Your Remote; Code Identification - GE RM24974 Manual De Instrucciones

Using Your Remote

Code Identification

The Code Identification Feature allows you to identify
the three digit library code stored under your device
button. For example, if you want to find out what
three digit code is stored under your TV device button,
follow the six steps below:
1. Press and hold the SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired
device button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the SETUP button. The
red indicator blinks once and remains lit.
4. To find the first digit for the code stored
under the device button pressed in step 2,
press each numeric
button from 0-9 in
turn. The number that
causes the indicator
light to blink is the first
digit in your code.
5. To find the second
digit, repeat step 4.
6. Repeat step 4 again to find the third digit. This
time the red indicator turns off and stays off.
11
SETUP
SETUP