Aigostar 30KLR Manual De Instrucciones página 7

indication） ．
(6).An automatic safety cut-out has been fitted for protection against
overheating, it will operate if the kettle is switched on
when containing insufficient water．Always ensure the water
inside the kettle covers the minimum mark on the water level
indicator gauge．If the automatic safety cut-out has operated,
switch the kettle off, disconnect from the power outlet and allow
the kettle to cool down for 5 to 10 minutes．The refill with and
switch on, the kettle will work as normal．
(7).After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring. If the kettle is overfilled, boiling
water may be ejected. The kettle is only to be used with the stand
provided.
(8).This appliance is intended to be used in household and similar
applications such as:
staff kitchen areas in shops, offices and other working
-
environments;
farm houses;
-
by clients in hotels, motels and other residential type environments;
-
bed and breakfast type environments.
-
2．Basal operation：
(1).Put the base on the dry , smooth and horizontal plane , insert the
plug to the socket .When the kettle is inserted into the base , the
power puts through automatically．
(2).Press the "
running.
(3).After the water boils, indicator turns off and the buzzer sends out a
"di-"sound at the same time.
3．Advanced operation：
(1).Press the "
" key shortly, with the sound "Di.", it starts
" key shortly, with the sound "Di.", it starts running.
GB
4