Black and Decker Master Mechanic TV200 Manual De Instrucciones página 6

*TV200 / 390001 11/14/03 7:28 AM
liquid get inside the tool; never immerse any part of the tool into a
liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by authorized
service centers or other qualified service organizations, always using
identical replacement parts.
Lubrication
MASTER MECHANIC tools are properly lubricated at the factory and
are ready for use.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than those listed in this manual)
should be performed by authorized service centers or other qualified
service organizations, always using identical replacement parts.
Accessories
Recommended accessories for use with your tool are available from
your local dealer or authorized service center.
WARNING: The use of any accessory not recommended for use
with this tool could be hazardous. For safety in use, the following
accessories should be used only in the sizes specified:
BITS, METAL DRILLING–Up to 1/4" (6mm). BITS,
MASONRY DRILLING–Up to 1/4" (6mm).
BITS, WOOD DRILLING–Up to 3/8" (10mm).
Page 6
Battery Pack Removal
IMPORTANT: This tool is designed for easy disassembly for the purpose
of battery pack removal. It is not designed to be re-assembled by the
consumer. Before attempting to disassemble this tool, turn it on and run
it in either direction until it stops to ensure a complete discharge of the
battery pack. To disassemble the tool, remove the screws in the side of
the tool body. Take the two body halves apart and you will find the
battery pack. Lift the battery pack out and pull off the terminal clips.
Two Year Quality Guarantee
This product is warranted for two years against any defects in material
and workmanship, If defective, the product will be repaired or replaced
free of charge. Simply provide proof of purchase and return the tool to
your place of purchase. Normal wear or damage due to abuse,
mishandling or unauthorized repair is not covered. This warranty does
not apply to accessories, This warranty gives you specific legal rights
and you may have other rights which vary from state to state.
30 Day Satisfaction Guarantee
If, for any reason, you are not completely satisfied with the performance
or results of this product, within thirty days of original purchase, it will
be repaired or replaced free of charge. Simply provide proof of
purchase and return the tool to your place of purchase.
If your tool requires out of warranty repairs, you may send or take your
tool to a Black & Decker owned Service Center. Black & Decker Service
Centers are listed under "Tools-Electric" in the yellow pages of the
phone directory or you may call 1-800-544-6986 for information on
your nearest Service Center.
6
TruServ
8600 W. Bryn Mawr Ave.
Chicago, IL 60631-3505