Black and Decker Master Mechanic TV200 Manual De Instrucciones página 2

*TV200 / 390001 11/14/03 7:28 AM
1
Depress for reverse (this side)
Enfoncer pour la marche arrière (de ce côté )
Oprima para reversa (desde el lado izquierdo)
Depress for forward (other side)
Enfoncer pour la marche avant (de l'autre côté )
Oprima para marcha hacia adelante (desde el lado derecho)
ESPECIFICACIONES
Cargador: 120V, 60 Hz, 8W
Salida: 11Vac, 130mA
2
Page 2
• Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
• Avoid accidental starting. Be sure switch is in the locked or off
position before inserting battery pack. Carrying tools with your finger
on the switch or inserting the battery pack into a tool with the switch
on invites accidents.
• Remove adjusting keys or wrenches before turning the tool on. A
wrench or a key that is left attached to a rotating part of the tool may
result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the tool in
unexpected situations.
• Use safety equipment. Always wear eye protection. Dust mask, non-
skid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions.
Tool Use and Care
• Use clamps or other practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or against
your body is unstable and may lead to loss of control.
• Do not force tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
• Do not use tool if switch does not turn it on or off. A tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Disconnect battery pack from tool or place the switch in the locked
or off position before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
• Store idle tools out of reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
• When battery pack is not in use, keep it away from other metal
objects like: paper clips, coins, keys, nails, screws or other small
2