Soul RUN FREE Manual Del Usuario página 6

Using Your Soul® "Run Free" Bluetooth® Headphones
Carefully remove your Soul® headphones and accessories from the protective packag-
ing. Make sure that all parts listed under Package Contents are inside the box. If you are
missing any parts please contact our customer support at www.soulelectronics.com/
support.
Proper Ear tip Selection
Your Soul® headphones include three pairs of ear tips. One pair is already installed on your
headphones and there are two additional pairs inside the packaging. Proper fit of the
headphones in your ears is essential for the best possible sound performance and comfort.
Improper fit will not allow you to take full advantage of the sound quality. By selecting the
correct set of ear tips you will create a proper seal for sound isolation from external noises.
You will also be able to fully benefit from increased bass response and overall better sound.
Ear tip Replacement
Try the fit of the headphones with the tips already installed. If the headphones feel
too loose, then replace the tips with the slightly larger tips provided. If they feel too
tight replace with the smaller tips provided.
1. Firmly grip the portion of the right headphone with one hand.
2. Gently pull the ear tip from the right headphone. You may need to rotate back
and forth for easy removal and to prevent damage to the existing tips. Repeat
procedure for left headphone.
3. While holding the right headphone, gently insert the new ear tip onto the ear tip
tube until it is firmly secured to the headphone. Repeat procedure for left
headphone. Once again you may need to use a rotating back and forth motion to
insert the ear tips on the headphone ear tip tube.
Ear tip Maintenance
It is recommended that you clean your ear tips on a regular basis. This will maintain
the sound quality of your headphones so you can continue to enjoy your music and
benefit from the full sound range. It is also important to clean your ear tips to maintain
safe use. Gently remove the ear tips from the headphones. Wash with warm water and
mild soap. Remove all dirt and earwax buildup. Rinse thoroughly with warm water.
Dry using a soft cloth and let dry fully before placing back on your headphones.
Caution
!
Never use any harsh cleaning agents.
Never clean ear tips while still on headphones. Water may damage the circuitry inside
your headphones causing permanent damage.
Do not place the headphones in your ear if they are still wet.
Selecting Method for Using Your Soul® Headphones
Now that you have selected the proper ear tips it is time to plug in your headphones
and begin enjoying your music the Soul® way. There are two ways to use your new
"Run Free" headphones. The first is with the detachable wireless Bluetooth® Dongle
and the second is with the straight audio cable with the Apple® in-line controller.
Using the Wireless Bluetooth® Dongle
Connect the ear buds (Figure 1) to the Bluetooth® dongle. Make sure that the connections
have snapped in firmly. Next connect the ear hooks onto top portion of the ear buds.
Note: The ear hooks are flexible and may be molded for custom fit of your ears.
5