Alcatel Onetouch go watch SM-013 Manual Del Usuario página 5


Install the new bands.
Install the GO WATCH bands by sliding the flat side of the bands from
left to right into the slots on the bottom and top of the GO WATCH.
The band without the buckle goes in the bottom slot. The band with the
buckle goes in the top slot.

Install the new front casing.
Bands can only be removed after the front casing is removed. Install the
bands before installing the front casing.
If the front casing does not attach to the GO WATCH, make sure
that the casing is in the right position and pinch it until it's held firmly
in place.
US-2