Horizon Global 76332 Instrucciones De Instalación página 6

7. Install hitch – raise hitch into position being careful not to push fasteners back into the frame. Using an 11/16" socket, loosely install the 7/16" conical toothed
washers, teeth side against hitch, and 7/16"-14 hex nuts onto carriage bolts, (4) places. Make sure the flat washers (item 6) are sitting flush against the bottom of
frame.
8. Tighten all 7/16-14 Gr5 fasteners with torque wrench
to 50 Lb.-Ft. ( 68 N*M)
Proper torque is needed to keep the hitch secure
to the vehicle when towing.
©2019 Horizon Global™ Corp - Printed in Mexico
9. Reinstall heat shield – Reinstall heat shield(s) using (4) bolts removed
in step 2.
Sheet 6 of 21 76332NP 11-21-19 Rev. A