General Safety Instructions - Zonair3D AIR+50 Manual De Usuario

Welcome
Thank you for choosing Zonair3D
50. Please take a few minutes to read this manual before starting to use your unit
in order to familiarize yourself with how it works.

General safety instructions

Air+ 50 is an air purification unit with a filter system of proven efficiency that
consists of three stages: the G4 prefilter, the HEPA H14 absolute filter and the
exclusive Zonair3D
equipment, which is why it is important to read the following safety instructions
carefully before using your unit.
·
This unit should not be used by those with reduced physical or mental capacities
without assistance or supervision.
·
Children should not use it without the supervision of an adult.
·
Do not block the Air+ 50 air inlet or outlet.
·
Do not pour water or other liquids onto the unit.
·
Do not start the unit if any of the electrical components are damaged or not
working properly.
·
Do not handle the interior of the unit, apart from to replace the filters (see
maintenance instructions). All other work should be carried out by personnel
authorized by Zonair3D
· Before removing any panel, make sure that the unit is not connected to the mains.
· Do not use filters that have not been supplied by Zonair3D
Installation
· Install the unit in a large space with air circulation.
· Do not install the unit close to explosives.
· Do not install the unit close to heat sources, such as radiators, fireplaces or ovens.
· Do not install the unit outside, without protection.
18 Air+ 50
and congratulations on having purchased Air+
TM
GRSystem filter for eliminating gases. It contains electrical
TM
.
TM
.
TM