Protection Devices; Personal Protective Equipment; Safety Signs; Residual Risks - Keyline NINJA LASER Manual De Uso Y Mantenimiento

D
A
B
Copyright by Keyline - Italy
GENERAL INFORMATION AND SAFETY
INSTRUCTIONS
1.5.0

Protection devices

a. Protective eye guard
b. Emergency Button
1.5.1

Personal protective equipment

When operating and maintaining the key cutting machine users must
wear the following personal protective equipment:
Protective clothing Maintainers and key cutting machine operators
must wear protective clothing that complies
with the basic safety requirements currently in
D
force.
In case of slippery floors users must wear safe-
ty shoes with anti-slip soles.
Safety glasses During key cutting operations operators must
wear eye protection (glasses or goggles).
Gloves If milling cutters are present, operators must
wear protective gloves to avoid injuries.
1.5.2

Safety signs

The key cutting machine bears the following safety signs.
- Wear safety glasses.
- Wear safety gloves.
C
NINJA LASER
1.6.0

Residual risks

When operating the machine the following residual risks - as well as
those connected with its use - must be taken into due consideration:
• Electrical hazard (C)
Since the machine is equipped with electrical de-
vices, in case of faults there might be a risk of elec-
trocution. The power line must be fitted with the
appropriate control and protection devices (circuit
breaker, thermal overload switch and differential
switch).
• Mechanical hazard (D)
The machine is fitted with milling cutters used in
key cutting operations. Operators must watch out
to avoid cutting their hands when they are cutting
keys or changing tools.
Man. cod. B409927FG Keyline S.p.A. 3