Direct Access Functions - Brionvega BV1 Libro De Instrucciones

AUTOMATIC TUNING SYSTEM
(SOME INFORMATION)
To carry out automatic tuning see the instructions in the
"Quick operation of the TV set" chapter.
The AUTOMEMO automatic tuning system automatically
tunes into and stores channels; those also transmitting their
recognition code are stored in the first programmes according
to their importance, e.g. RAI 1 in programme 1 (the pro-
gramme name is also inserted automatically), RAI 2 in 2,
RAI 3 in 3 and so on. The channels without recognition code,
usually those that do not broadcast Teletext, are stored in the
sequence in which they are found during automatic tuning.
Channels with a poor reception are stored at the end.
BEFORE STARTING THE AUTOMATIC TUNING OPERA-
TION MAKE SURE THAT THE CONFIGURATION MENU
CONTAINS THE APPROPRIATE NATION, OTHERWISE THE
CHANNEL ARRANGEMENT OPERATION DOES NOT TAKE
PLACE.
The whole automatic tuning sequence can take from 5 to 10
minutes (depending on the number of stations detected).
During this period do not give any command to the TV (nei-
ther using the front panel nor the remote control). It is normal
that a broadcasting station is stored more than once, e.g..
RAI 2 is stored on Programme 2 and on Programme 8 as
well. If you do not want multiple storage, simply eliminate the
unwanted ones from the SUMMARY menu by means of the
CANCEL button ( see the SUMMARY MENU paragraph).
IMPORTANT! (for multi-standard models only)
To effect automatic tuning/automemo on TV sets receiving
also French signals, SET THE CHANNEL LIST ON
"FRANCE".
IMPORTANT! (for multi-standard models only)
In multi-standard models the automemo creates some multiple
storages, some of which do not reproduce the sounds correct-
ly; this occurs because the audio standard is not the same for
all Countries. In this case simply eliminate the programmes
that are not tuned properly.

DIRECT ACCESS FUNCTIONS

These functions do not require access to a menu, but they
are directly available on the remote control.
• Button (5) Audio zero setting: this button is also called
All manuals and user guides at all-guides.com
• Button (12): this button displays the correct time (on chan-
• Button (10): Timer: it has the same function as the timer
• Button (11): this button allows you to choose one of the 5
• Button (7): these buttons increase or decrease the vol-
• Button (5): this button allows forward ( ) and backward
• Button (15): this button modifies the OSD or TXT back-
• Button (6): this button modifies the video input source for
1. By pressing the AV (6) button once you select AV
2. By pressing the AV button a second time you select S-
3. By pressing the AV button a third time you select the TV
MUTING and it rapidly turns off and restores the audio. It
may be necessary to turn off the audio rapidly when you
have to answer the phone (the screen displays the word
"Mute" when this function is activated).
nels broadcasting Teletext), the programme number (and
its name if previously assigned), the pre-set image and
the audio level.
[B-32]
12:30:3
Show
VOLUME IIIIIIIIIIIIIIIIIIIIIIIIIIII
described in the "Other Functions" menu. The screen dis-
plays the word Timer and indicates its status.
pre-set images: Show, Nature, Cinema, Sport, Games (see
"Image Menu"). In OSD the selection is displayed. The
screen will show the word describing the chosen configu-
ration.
ume. An audio level bar is displayed on the screen.
( ) scrolling of programmes.
ground from a) completely transparent, to b) semi trans-
parent or to c) black.
your TV, e.g.
VHS
source
RAI3 P3
91