König Electronic KN-WS300 Manual De Uso página 3

Set Alarm
Click ----- Alarm on/off
Hold enter into enter into
clock setting alarm
setting
Click Confi rm -----
the setting
item
Hold ----- -----
Click ----- confi rm the
setting item
Hold ----- -----
Click ----- -----
Hold ----- -----
3.2 Normal states
1. Hold "SET" to enter into time setting.
2. Click "Alarm" to switch the alarm on/off.
3. Hold "Alarm " for more than 2 seconds to enter into Alarm setting.
4. Click "Up" to switch between 12hr/24hr.
5. Press "C/F Down" to switch between °C/°F.
6. Press "Channel" to switch RF channel, CH1 → CH2 → CH3.
7. Press "ALERT" key to switch temperature alarm on/off.
8. Hold "ALERT" key 2 seconds to enter temperature alarm setting.
9. Press "MAX/MIN" key to check maximal and minimum of temperature and humidity.
10. Hold "MAX/MIN" key 2 seconds to clear all record of temperature and humidity.
11. The backlight will be turn on when sound controlled switch able will be put "on".
12. The backlight will be turn off when sound controlled switch able will be put "off ".
13. Hold "CH" key for 2 seconds to clear out all data of current "Channel".
14. When it is receiving signals, press "Down" key more than 2s will exit RCC receiving status.
15. When ALARM rings, click "SNOOZE" to enter into the snooze state every 5 minutes.
3.3 Time set
1. Hold "SET" key for 2 seconds to enter into time setting.
2. The sequence of time setting: OFFSET → Hour → minute → Year(2000-2099) → Month →
Date → Language → Exit.
3. There will have 1Hz fl ashing during setting.
4. Press "SET" to confi rm the setting, and enter the next setting state.
5. Press "Up" one time, the setting will go ahead for one step; hold the key for 2 seconds, it will
run forward by 8 steps/second.
6. Press "Down" one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
7. Moon phase is changed according to year, month, date.
8. The system will exit automatically if no key is operated in 8 seconds.
Up C/F SNOOZE
Down
12hr/24hr °C/°F switch Back Light/
switch able able enter
Snooze
----- Enter -----
into RCC
directly
one step one step Back light
forward backward
8steps/ 8steps/ -----
second second
forward backward
one step One step Back light
forward backward
8steps/ 8steps/ -----
second second
forward backward
one step one step Back light
forward backward
8steps/ 8steps/ -----
second second
forward backward
3
CH Alert Max/Min
Switch to On/Off Display
CH1, CH2, temperature max/min
CH3 Alarm
Clear Into clear max/
current temperature min
registered alarm setup
----- ----- -----
----- ----- -----
----- ----- -----
----- ----- -----
Choose Confi rm -----
needed the Setting
channel item
----- ----- -----