Switching The Microphone; Wired Boom Microphone - Sena Intercom 30K Manual Del Usuario

CAUTION:
Sena recommends using the clamp unit. The glued surface mounting plate is provided for convenience,
but is not the recommended mounting method. Sena is not responsible for its use.
2.3.

Switching the Microphone

If you want to use a different microphone instead of the static boom microphone, please refer to the
following steps.
1. Remove the back plate of the clamp unit.
2. Connect the microphone according to your helmet type.
3. Lock the microphone to the clamp.
4. Reattach the back plate to cover the microphone and the speaker port.
2.3.1.

Wired Boom Microphone

When installing the included wired boom microphone, place the hook and loop fastener at the end of the
boom microphone between the internal helmet cheek pad and the internal wall of the helmet shell. The
boom microphone should be mounted so it is facing close to your mouth when you wear the helmet.