Troubleshooting; Fault Reset - Sena Intercom 30K Manual Del Usuario

NAVIGATE FORWARD [icon] = Jog Dial - Rotate Right [icons]
"Remote control pairing"
EXECUTE [icon] = Phone Button - tap 1x
3. Enter pairing mode in the Remote Control device. The
Remote Control device in pairing mode. You will hear a voice prompt, "Remote control
connected", when they are successfully paired.
Enter Pairing Mode
REMOTE CONTROL = Enter Pairing Mode on Remote Control
"Remote control connected"
14.

Troubleshooting

Please visit Sena.com for answers to frequently asked questions. This detailed online FAQ section deals
with troubleshooting, illustrates case studies and contains tips on using the headset.
14.1.

Fault Reset

When the headset is not working properly, you can easily reset the unit:
1. Locate the pinhole reset button below on the back of the main unit.
2. Gently insert a paperclip into the hole and press the Fault Reset Button for 1 second with light
pressure.
Fault Reset = Hold 1sec
3. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default settings.
[voice prompt]
[voice prompt]
headset will automatically connect with the
[icon]