Resetting Factory Settings - Mohlenhoff Alpha direct Basisstation Control Manual Del Usuario

6 Menu guidance overview
The timer is divided into several categories. The categories are called with the MENU key.
MENU PROGRAM
NEW
INQUIRE
CHANGE
DELETE
END
7 First commissioning
Language, date, time, summer and winter time setting must be reset during first
commissioning, after resetting to factory settings, or after a simple reset:
¾ Press any key and follow the indications on the display.
8 Programming switching times
6 switching times are pre-programmed for C1 and C2.
Block
A switching time copied to several days (e. g. Mon - Fri).
Pre-programmed switching times for C1 and C2:
ON 05:00
OFF 08:00
ON 15:00
OFF 22:00
ON 06:00
OFF 23:00
46 free memory locations are available for programming an individual switching
time. Proceed as follows:
¾ Press "MENU".
OK
PROGRAM
COPY
(Block)
PLUS [Select week day]
SAVE
8.1 Change/delete switching times
¾ Press "MENU".
PROGRAM
NEW
INQUIRE
CHANGE
DELETE
4
TIME/DAT
TIME
DATE
SUM--WIN
WEEK-
DAY
DATE
FORMAT
TIME
FORMAT
END
Mon-Fri
Mon-Fri
Mon-Fri
Mon-Fri
Sat-Sun
Sat-Sun
NEW
CHANNEL C1
FREE 46
ON C1 On
HOUR
MINUTE
[Select week day]
SAVE
(Switching time for one day)
OK CHANNEL C1
MONDAY
CHANGE
HOUR
CHANGE
MINUTE
CHANGE CHANGE
BLOCK SINGLE DAY
MANUALLY OPTIONS
CHANNEL C1 LCD ILLUMINATION
CONTINUOUS ON LANGUAGE
CONTINUOUS OFF FACTORY SETTING
MANUAL ON INFO
END END
9 Establishing factory settings
9.1 Reset
The entries made during commissioning as well as the individually programmed swit-
ching times can be reset to factory settings by means of a reset.
The pre-programmed switching times are not deleted.
Resetting:
1. Press the 4 operating keys simultaneously.
2. Select your language.
3. Select:
RETAIN PROGRAMS
Retains the programmed switching times.
or
DELETE PROGRAMS
Deletes the switching times used so far.

9.2 Resetting factory settings

The pre-programmed switching times of the factory setting are deleted along with all
other indications and programs via the display menu.
Pre-programmed switching times cannot be restored after the reset.
Reset to factory settings:
¾ Press "MENU".
OPTIONS OK LCD ILLUMINATION
FACTORY SETTING
10 Cleaning
Only use a dry and solvent-free, soft cloth for cleaning.
11 Dismantling
WARNINGElectrical voltage! Danger to life!
• Always disconnect the base from the mains network and secure against
unintended activation before opening.
• Disconnect external voltages and secure against unintended activation.
• De-energise the complete installation.
• Remove the wiring to all externally connected components.
• Remove the base and dispose it of properly, if necessary.
These instructions are protected by copyright. All rights reserved. It
may not be copied, reproduced, abbreviated or transmitted, neither
in whole nor in parts, in any form, neither mechanically nor electroni-
cally, without the previous consent of the manufacturer.
END
LANGUAGE
LOAD FACTORY
SETTING