Specialist Personnel - STAUFF SPG-DIGI Manual De Instrucciones

Safety instructions
The SPG-DIGI is intended for pressure measurement within the ap-
proved ranges (& „Technical data" on page 37) .
Any other use of the SPG-DIGI is inadmissible, can lead to accidents or
the destruction of the SPG-DIGI and immediately renders any guaran-
tee and warranty claims against the manufacturer null and void.
Misuse
The SPG-DIGI does not comply with Directive 2014/34/EU and there-
fore must not be used in potentially explosive areas.
2.2

Specialist personnel

This operating manual is intended for trained specialist personnel who
are familiar with the applicable provisions and standards in the area of
use. The qualified personnel responsible for commissioning and oper-
ating the device must be suitably qualified. Such qualification can be
obtained through training or appropriate instruction.
The contents of this operating manual must be known to the specialist
personnel and accessible at all times.
9
V1.0/01/20