Descargar Imprimir esta página

Trama Compact Instrucciones De Montaje página 11

Publicidad

IMPORTANT - READ CAREFULLY AND
GB
KEEP FOR FUTURE REFERENCE
WARNING
Warning: Be aware of the risk of open fire and other sources of strong heat, such as electric
bar fires, gas fires, etc. in the near vicinity of the cot.
Warning: Do not use the cot if any part is broken, torn or missing and use only spare parts
approved by the manufacturer.
Warning: Do not leave anything in the cot or place the cot close to another product, which
could provide a foothold or present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords, etc.
Warning: Do not use more than one mattress in the cot.
Thickness of the mattress shall be such that the internal height (surface of the mattress to
the upper edge of the cot frame) is at least 500 mm.
NOTE: The Cot End (A) is marked with a small hole (X).
When the base is in the lowest position the top of the mattress used should be bellow this
mark (X).
The length and width shall be such that the gap between the mattress and the sides and
ends does not exceed 30 mm.
Before using the cot ensure all assembly fixings are properly tightened, and remember to
regularly check that they remain so. Loose screws can pinch parts of the body or catch
clothing (string or ribbons on dummies etc.), and present a danger of strangulation.
When the child is able to climb out of the cot, the cot shall no longer be used for that child.
It is normal when painting or varnishing natural products such as wood or its derivatives
that some variation in colour tone may occur on parts of this product.
COT CARE
If possible, do not place your cot next to a radiator or hot air vent.
The use of abrasive cleaners is not recommended.
Simply wipe clean and buff with a soft dry cloth.
Careless handling or movement of wooden furniture can damage it.
GUARANTEE
All TRAMA products have a period of guaranteed subject to the local law of the country in
which it is being sold, from the date of purchase, against mechanical defects which will be
repaired, or parts replaced free of charge within this period.
This is conditional upon the product having been used for the purpose for which it was
designed and no liability is accepted for defects arising out of fair wear and tear, undue
force, neglect or accident.
In furtherance of their policy of continuous product development
TRAMA reserve the right to make specification and design change.

Publicidad

loading