Reef Skim Manual Del Usuario página 9

delete camera
Use this function to
delete a camera from
the REEF-Cam app.
Select "OK" to
delete or "Cancel"
to exit and not
delete the camera
Event Viewer
This function is not
used with the
current version of
REEF-Cam.
Wireless setup
If your REEF-Cam has been set up and
connected to your WiFi router using an
ethernet cable, you can use this function to
change the connection to a wireless set-up.
Once the REEF-Cam
has been successfully
connected the
ethernet cable can be
removed.
Select "Wireless
Setup" and then from
the "Configuration-
Wireless" page select
the local WiFi network
(WiFi SSID) you will
be connecting to (in
most cases, your home
WiFi network).
Enter the WiFi
network password
(your home WiFi
network password).
Press
please note: If a
WiFi network is
NOT found press the
refresh button and
the REEF-Cam App
will search again.
Video setting
Use this function to adjust frame and bit rate
to optimise streaming and picture quality.
QVGA
To confirm any
changes made,
press
6
Useful Tip: Higher
frame rates can be
achieved at lower
quality settings. The
highest frame rate
and bit rate available
will require a good
internet connection,
but will offer the best
viewing experience.
For optimum viewing
experience when
QVga
using you
should select:-
512 Kbps/30fps
To return to the
"Camera Setting"
page press