Using The Self-Timer - CONCORD EyeQ Go! Manual Del Usuario

Ocultar thumbs Ver también para EyeQ Go!:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
TAKING PICTURES (CONTINUED)

USING THE SELF-TIMER

1
1. Turn your camera on (
make sure the review switch is in
CAPTURE mode. (
The review switch should be in the
position furthest away from the
shutter button.
3. The LED on the front of the
camera will blink every second
for ten seconds before picture is
taken. After taking the picture,
the camera will then reset itself
to normal CAPTURE mode.
2
) and
1
2
)
2. Press the SELF-TIMER button.
The Self-timer indicator (
appear on the back Status LCD.
Press the SHUTTER BUTTON to
start the self-timer.
9
) will

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Eye-q go

Tabla de contenido