Horizon Global 76177 Instrucciones De Instalación página 5

5. Install blocks and carriage bolts – using the provided fish wire
(part no. 5481), push the (2) carriage bolts into the hole widened
previously, insert the (2) blocks into the holes, and pull the fish wire
out, ensuring the bolts are seated into the blocks. See figure 2 for an
illustration.
7. Install fasteners - Install (4) M12 bolts and (2) hex nuts and (2) conical
toothed washers as shown in figure 1.
©2017 Horizon Global Americas Inc. - Printed in Mexico
6. Raise hitch into position – raise the hitch over the tailpipe(s) and align
holes in the hitch bracket with existing weldnuts in frame rail.
8. Tighten all M12 CL10.9 fasteners with torque wrench to 105Lb.-Ft.
(142N*M). Tighten all hex nuts to 75Lb.-Ft. (149N*W).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 5 of 18 76177NP 6-28-17 Rev. A