Kohler 1188999 Manual De Instrucciones página 2

Refill Tube
Tank Bolt
Washer
1. Remove the Flush Valve
NOTICE: Make sure that you have the correct flush valve for your
toilet model. The model number is located inside the tank. For more
information, visit kohler.com/serviceparts and enter your model
number.
NOTE: Your flush valve may appear different than the one shown.
Turn off the water supply.
Remove the tank cover.
Flush the toilet. Repeat until empty. Sponge out any remaining
water. Disconnect the water supply.
Disconnect the trip lever chain.
Disconnect the refill tube.
Remove the nuts and washers from the tank bolts. Remove the
tank.
Turn the flush valve nut counterclockwise to remove the flush
valve.
1333505-9-B
Tank Gasket
Flush Valve Washer
Flush Valve Nut
Nut
2
Flush Valve
Chain
Kohler Co.