Technical Information; Product Maintenance - Chauvet DJ Gig BAR IRC Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. T
ECHNICAL
Product
Maintenance
GigBAR™ IRC User Manual Rev. 3
All manuals and user guides at all-guides.com
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. To maintain
optimum
performance,
However, usage and environmental conditions contribute to increasing the cleaning frequency.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external surfaces and fan vents.
4.
Clean the transparent panel (laser aperture) with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
5.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6.
Softly wipe any dirt or grime to the outside edges of the glass.
7.
Gently polish the transparent surface until they are free of haze and lint.
Always dry the optical surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could damage it.
clean
the
product
at
least
twice
a
Page 29 of 96
month.

Publicidad

Tabla de contenido
loading

Tabla de contenido