Data Management - Prestigio PHCBPM Manual De Instrucciones

Quick Start Guide
Prestigio Smart Blood Pressure Monitor
to start pair-up. The symbol
will be shown on the LCD alternatively, indicating pair-up is
proceeding.
• If SUCCEED, symbol
• If FAIL, symbol "
3) The monitor will shut off automatically after Pair-up process
is completed.
8. Select Correct User before Each Measurement
1) Press START button when the monitor is off. The monitor
turns on and the user icon used last time blinks.
2) Press the MEM or SET button to switch among User 1, User 2
and Guest.
3) Press the START button to confirm the selection and start the
measurement.
9. Start measurement
1) After correctly positioning the cuff, press START button to
turn on the monitor and select the correct user number, and
then it will complete the measurement process automatically.
• Adjust to zero.
• Inflating and measuring.
• Display and save the measuring result.
2) This device will proceed to data transmission automatically
after measurement. The Bluetooth symbol blinks.
3) After the data is successfully transmitted, press STOP button
to turn off the monitor.
Note: There isn't any Guest icon shown on the display when
you select user "Guest". The device will turn off automatically
after measurement, and the measurement data won't be
transmitted.

Data management

10. Recalling the Records
1) Press "MEM" button to access the memory. The monitor will
display the last measurement data.
2) Press "MEM/UP" button or "SET/DOWN" button to rotate
the history records. "MEM/UP" to go forward; "SET/DOWN"
to go backward.
Note:
and the symbol
will be shown on the LCD.
" will be shown on the LCD.