Technical Specifications - Prestigio PHCBPM Manual De Instrucciones

• If you want to check other users' measurement data, please
press the START button to turn on the monitor to select the
correct user, press the STOP button to turn off the monitor.
Then press "MEM" button to access the memory.
• The User Guest only can check the last record.
11. Deleting the Records
When you did not obtain the accurate measurement, you can
clear all the measuring results by following below steps.
1) Under Memory Recalling Mode, press and hold both the
"MEM" button for 3 seconds.
2) When the LCD display blinking "dEL ALL", press "SET"
button to confirm clearing. The LCD will display "dEL dOnE",
indicating that memory clearing is completed. And then it will
turn off automatically.
3) If you wish to stop the deleting process, press "START/STOP"
to turn off the monitor.
4) When there is no memory in the monitor, if you press the
"MEM" button to look up history, the LCD will display as the
third picture above.

Technical Specifications

Item
Power supply
Display mode
Measurement mode Oscillographic testing mode
Measurement range Pressure: 0 kpa - 40 kpa (0 mmHg -
Prestigio Smart Blood Pressure Monitor
MEM
SET
Specification
2*AAA carbon batteries
Digital LCD V.A.36 x 41 mm
300 mmHg)
pulse value: (40 - 199) beats / minute
Quick Start Guide
MEM
SET
MEM
SET