Bosch Rexroth SD301 Manual Del Usuario página 20

20/76 Bosch Rexroth AG
4 Assembly
4.1.2.1 System boxes with non-standard
locks
The universal display holder is attached with
the mounting nuts (Figure 4) provided for in-
stallation on system boxes with non-standard
locks.
For system boxes of the first series, see
chapter 4.1.1.
Figure 4:
SD301 | 3 609 929 827/06.06
4.1.2.2 Machine frames
For installation on machine frames, the spac-
er must be removed before the universal
holder is attached with the side plate at the
desired position (Figure 5).
Figure 5:
4.1.2.3 Surfaces
The spacer and the side plate must be re-
moved to install the universal holder on any
surface. The universal holder is attached di-
rectly to the surface (Figure 6).
Figure 6: