LIMIT 98 Manual Del Usuario página 7

Operations:
1. Power On and Off
1.1 Press the measurement trigger (Pos.9) to turn on the thermometer, LCD screen (Pos. 2) and backlight
will turn on.
1.2 The thermometer will turn off automatically if there is no operation in 8 s.
2. Manual measurement
2.1 Aim at the target then press and hold the trigger. SCAN icon will indicate the targets temperature is
being measured.
2.2 Release trigger and the SCAN icon will disappear, and HOLD icon appear indicating that the measuring
has stopped, and the last value will be saved in the display.
3. Laser beam setup
Press Back light/Laser key (Pos.5) to turn ON or OFF the laser beam. When
display you can measure without laser beam.
4. Backlight setup
Press Backlight/Laser button twice to turn on or turn off the back light on LCD display.
5. Functions setup.
5.1 Press MODE key (Pos.5) to choose between functions and values.
5.2 Press UP or DOWN key (Pos. 6 & 7) to turn ON / OFF or change value.
Note: Instrument will exit setup after 5 seconds if there are no operations.
3
English
icon disappear from the
GB