English; Bluetooth Pairing; Presentation - Ledwood LD-T14R-TWS Manual Del Usuario

ENGLISH

English
CHARACTERISTICS
French
Mini wireless stereo earbuds (TWS), separate left and right channels, HIFI sound; the left
and right earbuds are both Bluetooth compatible and can be used separately or together.
Reference
Dutch/Belgium
Bluetooth version
Bluetooth mode A2DP1.3/ HFP1.7/AVRCP1.6/ AVCTP.1.4/ AVDTP.1.3/ AVRCP.1.6
German
Bluetooth frequency
Bluetooth max. power
Bluetooth range
Italian
Speakers
Microphone
Spanish
Charging
Battery capacity
Portuguese
Autonomy in Play mode
Autonomy in standby mode
Swedish
Max. acoustic pressure
Finnish
Frequency response
Impedance
Accessories
Danish

PRESENTATION

1 Anti-dust screen - 2 Multi-function button - 3 Microphone - 4 Charging socket
Norwegian
5 Charging unit ON/OFF switch / Charging unit LED - 6 5V USB socket
Polish
4
LD-T14R-TWS
V5.0 + EDR
2.4GHZ
2 dBm
10 metres (without obstacle)
2 x 6 mW
Built-in
5V USB/DC charger socket
Individual earbud: 45mAh
Charging station: 300mAh
Individual earbud: 3 hours 30 minutes
Pairing mode: 3 hours
Individual earbud: 100 hours
Pairing mode: 60 hours
≥90dB
150-18kHz
30ohms
Charging unit and USB cable

BLUETOOTH PAIRING

Press the multifunction buttons on each earbud for 3 seconds to turn them on. They are au-
tomatically paired when one of the LED indicators turns off while the other continues to flash.
Turn on the Bluetooth on your source device and select «LD-T14» to connect the headphones.
When the flashing LED also goes out, the headphones are connected.
Note: The earbuds are automatically paired with each other when they are turned on. If not,
follow the manual pairing procedure below:
a. Press the multifunction buttons on each of the earbuds until the LED indicator alternately
flashes red and green, and a voice message indicates «power on».
b. Press one of the multifunction buttons for 3 seconds. A voice message indicates «connec-
ted». The LED indicator of one of the earbuds turns off while the other continues to flash.
The pairing is successful.
c. Turn on the Bluetooth on your source device and select «LD-T14» to connect the earbuds.
When the flashing LED also turns off, the earbuds are connected.
WARNING
1. If the earbuds have been successfully paired for the first time, there is no need to repeat
the pairing procedure when using them again.
2. If the pairing does not work the first time, deconnect source device, turn off the earbuds
and try again.
BLUETOOTH USE
1. Making phone calls
Make sure the earbuds are paired correctly with your smartphone before making phone calls.
To answer a call, quickly press one of the multifunction buttons and reject the call by pressing
twice the same button. When listening to music, redial the last number by quickly pressing
the same button twice.
2. Listening to music
Make sure the earbuds are connected to your smartphone before listening to music. Briefly
press the multifunction button to stop the music and press it again to resume playback.
5