SPC GLEE 9 Manual De Usuario página 28

To connect a USB memory or device, connect one end of
the USB-OTG cable supplied with the device and the other
end into the USB device that you want to connect.
NOTE: You may need to use your finger nail or a slightly long object
to help you to insert and remove the card.
The card and USB memory (not included) must be formatted in
FAT32.
TURNING ON / OFF THE DEVICE
Switch on the device by pressing the key (2) during
some seconds. This process needs some time, you have to
wait until it finishes.
The first time you power the unit on, a configuration wizard
will appear, follow the steps until the end. Once completed,
the main desktop will be shown, where you can see the
bottom information bar, some shortcuts to different
functions, and the icon to access the menu.
To switch the device off, keep pressing the (2) during
some seconds. Press "OK" to confirm.
Next time you power it on, the device will go to locking
screen, you have to press and move the lock icon to the
28