Replacing the Battery
The LCD screen will show the following icon when it is time
for new batteries. This picture will be shown at the start of a
treatment or during treatment. The device will turn off after this
picture is displayed.
Never change the batteries when the device is running.
Wait until the device stops operating to change the battery.
The picture in Figure 4, below, shows the correct way to replace
the battery. When replacing the battery, you will see the correct
way to put them in on the inside of the battery compartment. Use
ONLY the batteries supplied with SpinaLogic. They are located in
the carrying case.
Figure 4. Battery Compartment
9