Jam HX-HP110 Folleto De Instrucciones página 4

C – BUTTON FUNCTION
Quickly press the power button once to play your
music.
To increase the volume, quickly press the "+" button
once; to lower the volume, quickly press the "–"
button once.
To skip forward a track, press and hold the "+" button
for 2 seconds; to skip back a track, press and hold
the "–" button for 2 seconds.
To activate the voice assistant, click the power button
3 times.
D – ANC FUNCTION
ANC (Active Noise Cancellation) uses technology to
identify unwanted noise and cancel it out so you can
focus.
To turn ANC on, move the "NC" switch upwards; a
white LED will illuminate to show the ANC is active.
To turn the ANC off, move the "NC" switch
downwards; the white LED will turn off to show
ANC is inactive. The ANC function can be used
when the headphones are powered off if desired. To
conserve battery life, turn off the ANC function when
headphones are not in use.
E – CALL HANDLING
When listening to your music, if a call comes in,
quickly press the power button once to pick up a call;
quickly press again when you're done to hang up.
While on a call, if you want to move the conversation
from your headphones to your device, press and hold
the power button for 2 seconds.
If a call comes in and you don't want to pick it up,
press and hold the power button for 2 seconds to
send the call to voicemail.
*See tables below for complete button function and
LED light indicator interpretation.
EN
...1x
...1x
...1x
...1x
...2s
...2s
...2s
...2s
4