D-Link DAP-2553 Guía De Instalación Rápida página 4

DAP-2553 to your network
A.
Connect the power adapter to the receptor on the rear panel of the
DAP-2553 and then plug the other end of the power adapter to a wall
outlet or power strip. The power LED will turn ON to indicate proper
operation.
Using an Ethernet cable, insert one end of the cable to the LAN port on
B.
the rear panel of the DAP-2553 and the other end of the cable to a switch.
Note: You can also connect the DAP-2553 directly to the computer that
will be used for configuration. The LAN LED will illuminate to indicate a
proper Ethernet connection.
Computers with 802.11 b/g/draft n wireless adapters can connect to
C.
the DAP-2553.
B. LAN Port
Connects DAP-2553 to a switch
or PC.
4
Connecting the
C. Antennas
Used to broadcast wireless network
and recieve connections from 802.11a
b/g/draft n wireless clients.
D. Reset
Reset the Access Point.
A. Power Receptor
Receptor for Power Adapter.
D-Link DAP-2553 Quick Install Guide