Essilor FHE 300 Manual De Instrucciones, Uso Y Conservación página 10

Réf. man FHE300
INSTRUCTIONS FOR THE USER
CONNECTION AND OPERATION
Before connecting the device, check that the line voltage corresponds to that
indicated on the label on the machine and that the main switch is set to "0" (zero).
Place the device on a completely flat surface in order to
ensure maximum stability and take care to leave a free space
of at least 10 cm either side and behind. After checking that
the main switch is set to "0" (zero), connect the power cable
by first of all attaching the end which connects to the body of
the machine and then the end with the plug.Make sure that
the cable is away from the working area as this can reach
dangerously high temperatures.
OPERATION
Is done by turning the main switch which lights up to indicate that the device has power
STOP MODES AND EMERGENCY STOP
The normal stop function of the device is achieved by setting the main switch to "0" (zero).
The emergency stop function is achieved by disconnecting the power supply from the plug
socket.
After an emergency stop or a stop due to an anomaly or a power cut, always set the
main switch to "0" (zero).
EXAMPLES OF WORK
• Set the device to cool or heat using the switch. (2)
• Select the temperature level using the switch(2)
• Start the machine by pressing the main switch(1)
• After 1.5 minutes, the machine is ready for use
• Place the part of frame to be softened between the heat
conveyors(5)
• Mold the part according to requirements; if necessary the
temperature can be adjusted using the control (4)
Be careful not to introduce any thread-like objects (e.g., arms of the glasses) into the
grills (6) to avoid risking contact with live parts.
To warm up a small surface on the frame (bridge, spectacle...) please use the heat
conveyor. Once the step is done, this accessory must be removed as this can provoke an overheating
inside the machine.
LE PRÉSENT MANUEL EST LA PROPRIÉTÉ INTELLECTUELLE DE
Instructions and maintenance manual
Rév. 7/2014
3
2
TOUTE REPRODUCTION EN TOUT OU EN PARTIE EST INTERDITE
EN
Page 10 sur
37
10cm
10cm 10cm
5
1
6
4