Réf. man FHE300
TROUBLE SHOOTING
Problem:
Possible cause
Spent fuse
Resistance and/or
broken motor
(*)To check the fuse, turn the main switch to "0" (zero),
disconnect the power cable and open the case.
Remove the fuse and check the integrity of the wiring inside
DISMANTLING THE MACHINE AT THE END OF ITS LIFE
The symbol of a dustbin with a line through it indicates that the device should be
disposed of separately to general waste. The recycling of the device at the end of its
life must be planned and managed by the manufacturer. The user wishing to dispose
of the device should contact the manufacturer and follow their recycling procedures.
Complying with the planned recycling procedures for the device helps to avoid
possible negative effects on the environment and health, and promotes the re-use
and/or recycling of the component parts of the device.
Incorrect disposal of the device by its owner may result in penalties, in line with the
current standards in the country of use of the device.
LE PRÉSENT MANUEL EST LA PROPRIÉTÉ INTELLECTUELLE DE
Instructions and maintenance manual
Rév. 7/2014
The machine is not heating or does not blow hot
air
Replace the existing fuse inside the
Contact the Help desk
ACTION
plug(*)
TOUTE REPRODUCTION EN TOUT OU EN PARTIE EST INTERDITE
EN
Page 12 sur
37