70mai MIDRIVET01 Manual Del Usuario página 14

wheels and back wheels, and at no load and full load would be different. Users can find such
information on the car door of the driver' s seat (near pillar B), inside the fuel tank cover or in the
car manual.
13. Sometimes, the receiver may not display any data or is slow in displaying the data. Do not
worry, this is the result of the data transmission strategy of the sensors. In order to prolong the
sensors' service life and the sensors will not transmit data uninterruptedly, but will only do so
when the car reaches a certain speed or when there is a significant change in tire pressure or
temperature in a short period of time.
14. When the receiver issues a buzzer alarm, stop the car safely at the side of the road as soon as
possible and check your tires.
15. The pressure and temperature values for the four tires shown on the receiver may be different.
This is normal and the result of different wear and tear of each tire.
Basic specification
1. Sensor
Working voltage: 2.0～3.6V
Emission current: 1～6.6mA
Air pressure range: 0.0 Bar～8.0 Bar
Working temperature: -40℃～125℃
Storage temperature: -40℃～125℃
Air Pressure Accuracy: ± 0.07 bar at 0 to 20 ℃; ± 0.1 bar at -20 to 0 ℃, 20 to 85 ℃; ± 0.16 bar at
-40 to -20 ℃, 85 to 125 ℃.
Temperature Accuracy: ± 3 to -20 to 70 ℃; ± 5 ℃ at -40 to -20 ℃, 70 to 125 ℃.
Operating Frequency: 433 MHz
Battery Life: 10 years (2 hours of driving per day)
2. Receiver
Working Voltage: 5V
Working Current: 1A
Working Temperature: -20℃～70℃
Storage Temperature:-35℃～85℃
Dimensions: 78.58 × 89.92 × 28.59mm
Battery Capacity: 500mAh
Power Supply: Solar/USB cable
1２