70mai MIDRIVET01 Manual Del Usuario página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Receiver
1. Power On
After installing the receiver, press and hold the power button or insert the USB cable to turn it
on. When the receiver turns on, it will produce a "dee" sound and start showing the tire pressure
and temperature on the display. The display may show "--" initially, which is normal. Tire
pressure and temperature will be displayed after the car has moved for 3-5 minutes.
Alternatively, you can turn on the receiver while installing the sensors at the workshop and the
tire pressure and temperature will be displayed on the receiver during the installation process.
2. Alarm Function
Leakage alarm
When the pressure of any tire drops by 0.2 bar or more during any transmission cycle, the
receiver will trigger a buzzer alarm and the pressure value for the affected tire will keep flashing
on the display.
The buzzer alarm can be stopped by pressing the power button or when the tire pressure stops
dropping.
High pressure alarm
When the pressure of any tire is 125% higher than the standard tire pressure at cold state during
any transmission cycle, the receiver will trigger a buzzer alarm and the pressure value for the
affected tire will keep flashing on the display.
The buzzer alarm can be stopped by pressing the power button or when the tire pressure is 0.1 bar
lower than the alarm threshold. (Default high pressure alarm threshold: 3.0 bar)
Pressure alarm settings should be adjusted for different car models based on the car manual or after consulting a
workshop.
Low pressure alarm
When the pressure of any tire is 75% lower than the standard tire pressure at cold state during
any transmission cycle, the receiver will trigger a buzzer alarm and the pressure value for the
affected tire will keep flashing on the display.
The buzzer alarm can be stopped by pressing the power button or when the tire pressure is 0.1
bar higher than the alarm threshold. (Default low pressure alarm threshold: 1.8 bar)
Pressure alarm settings should be adjusted for different car models based on the car manual or after consulting a
workshop.
1 8

Publicidad

Tabla de contenido
loading

Productos relacionados para 70mai MIDRIVET01

Tabla de contenido