How To Control Your Ac - TLC TTW Serie Manual Del Usuario

How to Control Your AC

All the basics you need to know to stay cool!
1. Digital Display: When the timer is not
in use, the operation mode and the set
temperature should be displayed. Time
should be displayed under the timer setting.
2. and Buttons – use these buttons
on the control panel or remote control
to increase or decrease the desired
temperature, or time using the Timer. The
temperature range is:
61°-88° Fahrenheit, or 16°-31° Celsius
3. Power Button: Turn the air conditioner on
and off.
4. Modes – Press the Mode button on the
control panel to cycle and select a Mode,
or select a Mode by pressing the desired
button the remote.
• Cool Mode - The cooling function allows the
air conditioner to cool the room and reduce
air humidity at the same time. Adjust the
fan speed and temperature to your desired
comfort level. In this mode, if Eco is not enabled, the fan may continue to run after reaching
the desired temperature.
• Dry Mode – This function reduces the humidity of the air to make the room more comfortable.
Press the Mode button to set to Dry mode - an automatic function of alternating cooling
cycles and air fan is activated.
This design feature helps remove moisture and increase efficiency.
You may hear the thermostat click when the compressor cycles on and off. Water should
collect in the base pan on rainy days, or high humidity days. The water may overflow and drip
from the unit on the outside. The fan may run, even when the compressor is not on.
• Fan Mode: Fan Mode helps to circulate air in your home, but only works when the air
conditioner is vented
• Auto Mode: In Auto mode the unit automatically chooses the fan speed and the mode of
operation (Cool, Dry or Fan).In this mode the temperature is set automatically according
to the room temperature (tested by the temperature sensor which is incorporated in the
indoor unit.).
• Heat Mode: The heating function allows the air conditioner to heat the room. Press the Mode
button to activate the heating function. To optimize the function of the air conditioner, adjust
the temperature and the speed by pressing the button indicated. Modules with heater only.
5. Timer Button – press the Timer button on the panel or the Timer button on the remote to set
the timer.
• Set Timer On: With the AC off, press the Timer button and then use the
and
use the
Press the timer button again to start the countdown.
• Set Timer Off: With the AC on, press the Timer button and then use the
buttons to set the length of time before the AC turns off. Press the timer button again
to start the countdown.
buttons to set the desired temperature. Press the Timer button again and
and buttons to set the desired amount of time before the AC turns on.
12
and