Maintenance Schedule - Bosch GTK 40 Professional Manual Original

OBJ_BUCH-1038-001.book Page 29 Wednesday, December 9, 2009 1:38 PM

Maintenance Schedule

Always keep air outlet 4, discharge lock-off 2 and trigger
10 clean and free of foreign material (dust, chips, sand,
etc).
Measure
Draining the exhaust filter daily.
Keeping the lubricator filled at all
times.
Cleaning the magazine 8 and maga-
zine slider 11.
Ensuring that the discharge lock-off 2
functions properly.
Lubricating the pneumatic tool.
Draining the compressor.
Bosch Power Tools
Clean the magazine 8. Remove any plastic or wood chips
that may accumulate in the magazine during operation.
Clean the pneumatic tool in regular intervals using com-
pressed air.
Explanation
Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
Ensures the lubrication of the pneu-
matic tool.
Prevents a staple (GTK 40) or brad
(GSK 50) from becoming jammed.
Promotes your work safety and effi-
cient usage of the pneumatic tool.
Reduces the wear of the pneumatic
tool.
Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
English | 29
Action
– Open the drain valve.
– Fill lubricator with the recommend-
ed lubricants.
(See "Lubricating the Pneumatic
Tool", page 28)
– Blow out the mechanism of the
magazine/magazine slider daily with
compressed air.
– Blow out the mechanism of the
discharge lock-off daily with com-
pressed air.
– Apply 2 3 drops of lubricant into air
–
connector 6.
(See "Lubricating the Pneumatic
Tool", page 28)
– Open the drain valve of the com-
pressor tank.
1 609 929 U13 | (9.12.09)