Beper P101CUD501 Manual De Instrucciones página 9

Hot Dog Machine Use instructions
Do not expose the hot dog maker to sources of moisture and do not use
it outdoors. In the event of liquid infiltration into the main unit, immediately
unplug it from the electrical socket and have the machine repaired by qua-
lified personnel.
Description Fig.A
1. Main unit
2. Steamer
3. Lid
4. Heating rod
5. Power cord
6. Switch
7. Water tank
8. MAX water level indicator
9. Locking tabs
Instructions
First use
When using the hot dog maker for the first time, wash the steamer and lid with warm water and dry carefully.
Clean the heating rod with a damp cloth and dry well. Do not immerse the main unit in water.
How to use it
Steaming
Place the hot dog maker on a stable, horizontal surface.
Remove the lid and place it aside.
Remove the steamer from the main unit.
Pour the water up to the MAX level indicated on the internal wall of the water tank. Reposition the steamer by
framing properly the 4 grooves positioned on its lower edge onto the 4 corresponding locking tabs.
Insert up to 6 hot dogs inside the steamer and close it with the lid.
As an alternative to hot dogs, you can steam eggs or vegetables.
Attention:
Never turn on the hot dog maker before adding food.
Never turn on the hot dog maker before putting the lid over the steamer.
Connect the power cord to the power outlet. Turn on the hot dog maker by positioning the switch on "i".
Attention:
Do not cover the vent hole positioned in the centre of the lid while the hot dog maker is in operation.
Do not approach any part of the body to the very hole where hot steam comes out. Danger of burns!
After 6 to 8 minutes the hot dogs will be well cooked, reposition the switch on "O". Remove the steamer using
pot holders and be careful not to get burned.
Cooking time will vary depending on whether the food has been stored in the refrigerator, frozen, and/or depen-
ding on the quantity and size of the food. Do not touch the steamer, lid, heating rod and main unit when the hot
dog maker is running.
Bread warming
Insert the bread into the heating rod so that it fits perfectly in the center. Place the switch on "II". After a few
minutes the bread will be ready, reposition the switch on "O". Carefully remove the bread without touching the
heating rod.
9
EN