Emptying Depot And Depressurised Gas Compartment - WIK GA11 Manual De Instrucciones

5. Commissioning, operation

5.6 Emptying depot and depressurised gas compartment

The depot can be emptied only when there is measuring gas inside. If the depot is
already empty, the procedure is cancelled with an error message.
1. Press "Empty storage".
2. Select the gas compartment for pumping the measuring gas back (only available
when the "pumping back" function is selected).
⇒
Measuring gas is pumped back.
⇒
Measurement is finished.
Connection 
The measuring gas is directly pumped back into the measured gas compartment.
Connection 
The measuring gas is pumped into a pressurised external gas compartment (e.g. gas cylinder).
The maximal pumping capacity of the analytic instrument is:
10 bar abs. (N₂-Analyser)
■
External container 
With the function activated, the measuring gas is emptied from an external container at
connection  as well.
WIKA operating instructions analytic instrument, model GA11
EN
21