Yakima ROC 4 Manual Del Usuario página 3

ATTACH CRADLES AND
STABILIZERS.
Align notched
openings as
shown.
Slide cradles between
stabilizer arms.
Push cradles onto mast
and over stop-button, by
FLEXING CRADLES
UPWARD.
POSITION END CRADLE.
Move outside cradle and
stabilizer forward until
cradle rests against stop-
button. (Stabilizer arm slides
over stop-button).
1032616C-3/15
The cradle with reflecting Yakima logo should go
on last, with Yakima logo facing out.
The smooth depression on
right front side must face
SECURE CRADLES TO MAST.
Insert bolt and washer (right to left) into rounded depression
on underside of cradle.
Attach nut.
Use a flathead screwdriver.
TIGHTEN EACH CRADLE
Slide one stabilizer
arm onto mast and
over stop-button.
Slide other stabilizer
bar onto mast.
TOWARD you.
CAREFULLY.
Install StrataLock
(purchased separately),
and continue to step 15.
The StrataLock locks
the bike to the mount
and the mount to the
hitch.
ATTACH WORLD STRAPS.
Attach two World Straps to each cradle
and one strap to each stabilizer.