Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Publicidad
Manuales relacionados para Glacier bay VT3322G2
Resumen de contenidos para Glacier bay VT3322G2
- Página 1 2019 V1...
- Página 3 www.homedepot.com/glacierbay.com. Undermount clip (Not included) If you need to use as under -mount sink, please buy a similar screw (BB) HOMEDEPOT.COM/GLACIERBAY...
- Página 5 HOMEDEPOT.COM/GLACIERBAY...
- Página 6 Installing the faucet assembly Securing the faucet assembly CAUTION: Always shut off the water supply before □ From underneath the sink, secure the faucet removing an existing faucet or replacing any part of a assembly to the sink with the FastMount™ faucet.
- Página 7 Attaching the quick connector to Installing the weight the receiving block □ Install the weight clip (R) at the point of the □ hose marking “weight here”. attach it to the receiving block (1). Pull down moderately to ensure the connection has been □...
- Página 8 Installing the sink Making the water supply connections □ Apply silicone sealant (not included) around the underside and lip of the sink (A). □ Carefully lower the sink (A) into the counter. NOTE: The hot side inlet tube is indicated by a label. Avoid □...
- Página 9 WARNING: When you choose undermount style installation, please do not pull out the installation rail shown here as pulling this rail out will permanently damage the sink. It is strongly recommended that you have a professional installer install this sink for the undermount style. A1 or A2, (A1 or A2) (A1 or A2)
- Página 10 HOMEDEPOT.COM/GLACIERBAY...
- Página 11 steps HOMEDEPOT.COM/GLACIERBAY...
- Página 12 HOMEDEPOT.COM/GLACIERBAY...