Glacier bay 1521US-24-262 Guía De Uso Y Cuidado página 7

Installation (continued)
3
Installing the Door Pulls
□ Place a door pull (BB) over the pre-drilled holes on the right
door and secure to the door using the included bolts.
□ Repeat for remaining door pull (BB).
4
Adjusting the Levelers
NOTE: Clean area where the cabinet will be permanently
located prior to beginning installation, ensuring the cabinet
will not interfere with any water supply and drain lines
once mounted.
□ With the help of another adult, carefully place cabinet
against the wall in its final location.
□ Find and mark locations of wall studs behind the
permanent location of cabinet.
□ From inside cabinet, drill hole through cabinet mounting
area into wall studs.
□ Using mounting hardware (not included) appropriate for
your installation site, secure cabinet to wall stud. If possible,
secure cabinet to two wall studs for increased stability.
WARNING:
□ Cabinet MUST be secured to wall studs.
NOTE: Use preassembled levelers on feet of cabinet base
to level the item. Twisting the levelers counterclockwise
BB
will increase the height of cabinet base, twisting them
clockwise will decrease it.
7
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM/GLACIERBAY