Hudora 72111 Instrucciones De Montaje Y De Uso página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise
in the future. Please always include these instructions when handing on the product to a
third party. This product must be assembled by an adult. This product is not designed for
industrial use. The use of the product requires specific skills and knowledge to be able to
avoid injuries due to crashes and collisions. Always adjust according to the age of the user
and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Product Name
Item No. Max.
Height
for Sus-
pension
Baby swing
72111
110 cm
Baby high
72112
180 cm
swing
Nursery swing
72113
200 cm
If you have assembly problems or would like further information on the product, we have
all you need and more at http://www.hudora.de/.
CONTENTS
1 x swing set (72111 or 72112 or 72113)
1 x Manual
Other parts which may be included with the delivery in some circumstances are not
required.
SAFETY INSTRUCTION
• WARNING! Only suitable for private, domestic use and in the outdoors area!
• WARNING! Only use under direct supervision of an adult!
• WARNING! Not to be used by children over 36 months old, as not sufficiently stable!
• The owners of the swing as well as the competent supervisory personnel are
responsible for ensuring that all users follow the instructions in the operation manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manufacturer
specifications.
• No one is permitted to gain access to the swing area during use.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences,
clotheslines).
• Make sure that you have a safety clearance of at least 2 m (front and
back) beyond the maximum reach of the swing and make sure the ground
is level and shock absorbing (e.g. grass) without any sharp edges or
pointed objects, obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
• Clearance to stationary components on the side, such as the swing scaffolding must
be at least 40 cm.
• Maximum raised height must not exceed 2.5 meter as measured from the ground.
• Swinging components, such as a neighboring swing must be placed at a distance of at
least 60 cm.
• In idle mode, the swing must be at 40 cm from the ground.
• You should never install a swing in such a way that the user could be blinded by sun
rays.
ASSEMBLY
Prior to installation, carefully select and check the location where you will install the
swing. Please make sure that the swing carrier is adequately stable. Please also take into
account that swinging produces centrifugal forces that can put a lot of strain on the swing
carrier. Please consult an expert (statics expert, architect, carpenter) and ask how much
load your swing carrier can tolerate.
All images are examples of the design.
All manuals and user guides at all-guides.com
Min.
Max.
Dimension
Height for
Body
Suspen-
Weight
sion
65 cm
25 cm
36 x 28 cm
120 cm
25 kg
36 x 33 cm
130 cm
25 kg
31,5 x 31,5 cm
HUDORA I Jägerwald 13 I 42897 Remscheid I Germany
HANGING DEVICE AND ADJUSTMENT
1
2
The hanging points must be at least as far apart as the swing seat + 100mm. The swing
is packaged with two ropes and adjustment eyelets, so that the height of the swing can
be variably aligned with any suitable hanging device. Before hanging the swing, please
double fold the end of the rope of one of the ropes with the hanging ring (A) for a length
of approximately 20 cm (picture 1) and guide the loop you have created through the open
adjustment eyelet of the other end of the rope (B) of the same rope (picture 2). Close the
eyelet through the loop so that the rope can no longer be pulled out (picture 3). Repeat
this process with the second rope and eyelet of the swing. The hanging swing can now
be individually adjusted. No one should sit on the swing while making the adjustments.
When extending or reducing the length of the swing ropes please make sure that the
ropes remain equally long at all times. If the lengths of the ropes differ, this will lead to
circular pendulum movements of the swing. Make sure that swing is set up in such a way
that the person using the swing cannot reach the ground with the tips of his or her toes.
If in doubt, perform a few gentle test swings.
MAINTENANCE AND STORAGE
Check the product for damage or traces of wear and tear before and after each use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear.
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
You should also replace all the plastic parts after a maximum of 5 years to prevent a
possible failure of these parts. The constant exposure to sunlight can lead to fading of
the color, due to UV light that has however no hazardous safety aspect. If the product is
used outdoors you should dismantle it when it is not in use, especially in winter, in order
to prevent premature fading of the colours and corrosion, and to extend its service life.
Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Store the product in a safe place where it is protected from the elements, cannot be da-
maged, and cannot injure anyone. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt, please contact our
service team (http://www.hudora.de/service/).
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point in
your area. Local waste management companies will be able to answer your questions
on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/artnr/72112/.
www.hudora.de
3
4
Item no. 72111, 72112, 72113
As of 10/11
Page 3/8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7211272113

Tabla de contenido