Bostitch BRT130-E Manual Del Usuario página 7

DEPTH OF DRIVE ADJUSTMENT -
BRT160 ONLY
m WARNING: Disconnect the tool from the air supply
before making adjustments.
1. With air pressure set, drive a few fasteners into a
representative sample of the material to determine if
adjustment is necessary.
2. If adjustment is required, disconnect air supply.
3. Loosen nut on the nose of the tool (Fig 4) and move the
contact arm to the required position.
4. Tighten the nut and check that the trip mechanism parts
operate freely wth no binding or sticking.
5. Reconnect air supply and test to determine if further
adjustments are required.
DIRECTIONAL EXHAUST DEFLECTOR (FIG 5) -
BRT130 ONLY
The adjustable exhaust deflector can be rotated into any
desired position by hand without the use of hands.
GB
7