Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
Determine which direction the
mirror will be mounted, left or
right. To change direction of the
mirror, flip the entire unit 180
degrees.
Note: Nothing needs to be
uninstalled from the unit in order
to change directions of the
mirror.
Slide out the swivel/soft close
mechanism located on the back
of the mirror (See Figure 1A) and
pivot the frame perpendicular to
the mirror (See Figure 1B).
STEP 2
In the opened position, line up the
soft-close/swivel mechanism with
the 32mm systems holes and
attach it to the cabinet sidewall
using (4) M6 x 9mm euro screws.
For panels without system holes,
mark and pre-drill the panel using
a 1/8" drill bit. Line up the soft-
close/swivel mechanism with your
holes and attach it to the cabinet
sidewall using (4) #8 x 5/8" wood
screws (See Figure 2).
#2
#2
#2
1
8
PZ2
#2
#2
2
FIG. 1A
FIG. 2
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 1B
Publicidad
