Using The Battery Monitor - Dometic WAECO Cool Freeze F0440 Instrucciones De Uso

_kuehlcontainer.book Seite 41 Montag, 25. Oktober 2010 5:10 17
All manuals and user guides at all-guides.com
COOLFREEZE
➤ Plug the 110–240 V connection cable into the AC voltage socket and con-
nect it to the 110–240 V AC mains supply.
7.4

Using the battery monitor

The device is equipped with a battery monitor that protects your
vehicle battery against excessive discharging when the device is
connected to the 12/24 V vehicle electrics.
If the cooling container is operated when the vehicle ignition is switched off,
the cooling container switches off automatically as soon as the supply volt-
age falls below the cut-off voltage. The cooling container will switch back on
once the battery has been recharged to the restart voltage level (see "Tech-
nical data" on page 47).
Caution – risk of damage
When switched off by the battery monitor, the battery will no longer
be fully charged. Avoid starting repeatedly or operating electric
consumers without longer charging phases. Ensure that the battery
is recharged.
7.5 Using the cooling container
Caution – danger of overheating
Ensure at all times that there is sufficient ventilation so that the heat
that generated during operation can dissipate. Ensure that the ven-
tilation slots are not covered. Make sure that the device is suffi-
ciently far away from walls and other objects so that the air can
circulate.
➤ Place the cooling container on a firm base.
Make sure that the ventilation slots are not covered and that the heated
air can be dissipated.
➤ Connect the cooling container, see "Connecting the cooling container" on
page 38.
Caution – danger from excessively low temperature
Only put items in the cooling container which can be kept at the se-
lected temperature.
➤ Press the "I/0" button (fig. 0 1, page 7).
Operation
41