There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions
correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts
that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be
reviewed and corrective actions should be taken.
Before proceeding, find your elliptical's serial number located on a white barcode sticker on the front
stabilizer tube and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:
EP
AFG SPORT 5.5 OR 5.7AE ELLIPTICAL
MODEL NAME:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.