Rollei Hear:Me Wireless Manual De Instrucciones página 42

Function and use of the Receiver (RX)
42
Introduction to the function
1 Key for output amplification of channel A/B
Press the key shortly to adjust the output volume of the A/B
channel cyclically. It can also be independently adjusted in
mono mode and is generally set to the consistent output
volume when in use. The settings can only be made when the
monitor is switched on. If it is off, press any key to switch it
on. Once the screen is lit, you can make the settings.
2 Power on and M/S key
Press the key for approx. 3 seconds to switch the machine
on or off. Press the key shortly to switch between mono and
stereo. Please note that the stereo function cannot be im-
plemented with one transmitter and one receiver. The Mono/
Stereo function is only available when the monitor is switched
on. If it is off, press any key to switch it on. As soon as the
display is lit, you can make the settings.
ENGLISH
Reset
3
If an abnormal phenomenon occurs, such as a crash or
inability to turn on the unit, insert the reset pin into the reset
hole to reset the unit.
USB C charging port
4
To charge the receiver, connect it to the power supply using
the USB A-USB C charging cable. Do not leave the device
unattended during charging.
Note: No quick-chargers and/or superchargers may be used
to charge the Rollei Hear:Me Wireless, only power supplies
with a maximum of 5V, 2 A. Please use only the supplied
USB cable for charging the device.
Otherwise, there is a risk of
fire or electric shock.
1 2 3