Zyxel X6004 Manual Del Usuario página 12

1 Configure the WAN settings for the
X6004 as provided to you by your ISP
or network administrator. The WAN
interface serves as a gateway to your
ITSP and peer IP PBX as well as a SIP
server address for remote IP phones
connecting to the X6004.
This screen changes depending on the
encapsulation.
2 Configure the LAN IP address and
subnet mask of the X6004.
3 Check your settings and click Finish to
apply them and close the wizard.
If you changed the IP address
on the X6004, you must log in
again with the new IP address
(using HTTPS).
ENGLISH
12